Introduction

Stand-by.

3.5 mm Switch port 1.

3.5 mm Switch port 2.

Power Connector.

Head phone jack 3.5 mm.

Dispose of in accordance with your country's requirements.

CE is the abbreviation of the European Communities and this mark tells customs officials in the European Union that the product complies with one or more of the EC Directives.

The UKCA (UK Conformity Assessed) marking is a UK product marking that is used for goods being placed on the market in Great Britain (England, Wales and Scotland). It covers most goods which previously required the CE marking.

This mark is a certification mark employed on electronic products manufactured or sold in the United States which certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications Commission.

Mark representing compliance with regulatory requirements in Russia, Kazakhstan, and Belarus.

The Mark indicates compliance of electronic appliances such as IT and Audio/Video Equipment with NOM (Normas Oficiales Mexicanas) standards for safety in Mexico.

Japanese certification for electrical/electronic appliances and components.

The Technical Conformity Mark is a proof that the radio equipment conforms to the technical regulations specified in the Radio Law in Japan.

Conforms to relevant Japanese EMC requirements.

IC is the abbreviation of the Industry Canada and this mark tells customs officials in Canada that the product complies with one or more of the Canadian standards.

UL Classification Marks for Canada and the United States.

Recognized component mark for Canada and the United States.

Follow Instructions for Use.

Consult User´s Manual.

Recyclable material.

Recyclable material in Taiwan.

Conforms to relevant Australian EMC requirements.

Manufacturer.

Reference number.

Serial Number.

Safety Class II equipment (reinforced insulation).

This mark shows the pin out polarity on the AC/DC Power Adapter.

Enclosure ingress protection code per IEC 60529.

China Compulsory Certificate.

The most recognized International Safety mark. This safety listing signifies that the product was tested to IEC60601–1.

Recycling in China.

China RoHS compliance.

RoHS directive compliance.

The new DOE Level VI efficiency standard mandates that No-Load power consumption does not exceed 0.100 W for EPS ranging from <1 W to ≤ 49 W and does not exceed 0.210W for EPS >49W to ≤250W.

The CB Scheme is an international program created by the International Electrotechnical Commission for Electrical Equipment (IECEE) for the acceptance of product safety test results among participating laboratories and certification organizations around the world.

Warning.